Flat-Top Tanks

Cone Bottom Tanks are selected when a more complete drain out of stored chemical is required in indoor or outdoor installations. Flat Top Cone Bottom Tanks feature additional flats for fitting installation or mount.  Tanks require stands to support the conical bottoms. Tanks are manufactured from medium- or high-density polyethylene with U.V. inhibitors. Tank walls are translucent for level viewing and equipped with gallon indicators.

View technical drawings by clicking on the part number below.

Part No. Capacity Weight Dimensions Overall Height Lid Fitting Specific Gravity
CB0055-23† 55 Gallon – 15 deg 26 23 x 39 52″ 8″ 1 1/2″ 2.0
CB0100-23 100 Gallon – 15 deg 36 23 x 65 78″ 8″ 1 1/2″ 2.0
CB0145-36 145 Gallon – 15 deg 52 36 x 43 56″ 8″ 2″ 2.0
CB0150-36 150 Gallon – 45 deg 63 36 x 51 63″ 12″ 2″ 2.0
CB0200-36 200 Gallon – 15 deg 58 36 x 55 68″ 8″ 2″ 2.0
CB0200-42 200 Gallon – 45 deg 77 42 x 55 67″ 12″ 2″ 2.0
CBFD240-42 240 Gal Full Drain – 45 deg 77 42 x 59 69″ 12″ 2″ 2.0
CB0250-36 250 Gallon – 15 deg 76 36 x 67 80″ 8″ 2″ 2.0
CB0325-36 325 Gallon – 15 deg 92 36 x 84 97″ 8″ 2″ 2.0
CB0345-52 345 Gallon – 45 deg 102 52 x 58 70″ 12″ 2″ 2.0
CB0350-42 350 Gallon – 45 deg 120 42 x 81 93″ 12″ 2″ 2.0
CB0500-52 500 Gallon – 45 deg 132 52 x 81 92″ 12″ 2″ 2.0
CB0850-90 850 Gallon – 15 deg 212 91 x 56 67″ 16″ 2″ 1.7
CB1150-90 1150 Gallon – 15 deg 242 91 x 67 78″ 16″ 2″ 1.7
CB1550-90 1550 Gallon – 30 deg 286 91 x 88 97″ 16″ 2″ 1.7
CB2450-90 2450 Gallon – 15 deg 437 91 x 114 125″ 16″ 2″ 1.7
CB2550-90 2550 Gallon – 30 deg 502 91 x 126 134″ 16″ 2″ 1.7
Part No. Capacity Weight Dimensions Overall Height Lid Fitting Specific Gravity